H2O Audio wants you to know:
» H2O Audio housings are designed for
specific Apple iPod models, which vary by
generation and storage size. You must ensure
the correct housing is used for your iPod.
» Before using this housing for the first time,
you must perform a 'Leak Test'. Please refer to
the Printed Instructions for more information.
» To accommodate the different iPods (with
video) storage sizes, you may have to swap the
existing rails with the included rails. Please refer
to the Rail Instructions for more information.
» It is extremely important you ensure the
T-Seal is properly seated and clean. If it is out of
alignment, twisted or dirty you will cause
damage to, or destroy your iPod.
» If you have any concerns or issues with a
H2O Audio product do NOT contact your local
retailer. Please contact
H2O Audio:
1.800.708.6080
858.623.0339
support@h2oaudio.com
www.h2oaudio.com
H2O Audio
11211 Sorrento Valley Rd. Suite F
San Diego, CA 92121 USA