Filter
Top Products
14
04
To manually set the clock, choose the ‘Set
Clock’ option. The current time will be shown
in the bottom of the LCD Display with the
Hours between two arrows.
To adjust the Hours, press the LEFT and
RIGHT ARROW buttons to increase or
decrease the Hours.
Press the SELECT button. The Minutes will
be shown between two arrows.
To adjust the Minutes, press the LEFT and
RIGHT ARROW buttons to increase or
decrease the Minutes.
Press the SELECT button. The current year
will be shown in the bottom of the LCD
Display between two arrows.
To adjust the Year, press the LEFT and RIGHT
ARROW buttons to increase or decrease the
Year.
Press the SELECT button. The current Month
will be shown in the bottom of the LCD
Display between two arrows.
To adjust the Month, press the LEFT and
RIGHT ARROW buttons to increase or
decrease the Month.
Press the SELECT button. The current Day
will be shown in the bottom of the LCD
Display between two arrows.
To adjust the Day, press the LEFT and RIGHT
ARROW buttons to increase or decrease the
Day.
Press the SELECT button. The clock will be
updated and saved.
DONT FORGET! If you turn off the DAB
Radio at the ON/OFF Switch, the Clock will
automatically be updated and the preset
time will be lost.
Dynamic Range Compression (DRC)
Value
The DAB Radio is fitted with DRC. This function
is used to listen to stations at lower volumes
while maintaining subtle effects and keeping the
dialogue audible. There are three levels of DRC,
these are:
• 0 - No DRC is applied.
• ½ - 50% compression applied.
• 1 - 100% compression applied.
With the Radio menu displayed, press the
LEFT and RIGHT ARROW buttons to
highlight ‘DRC Value’.
Press the SELECT button.
Press the LEFT and RIGHT ARROW buttons
to highlight the desired DRC value.
Press the SELECT button to set the DRC
value.
SW Version
The SW Version function allows you to display
information on the current software.
With the Radio menu displayed, press the
LEFT and RIGHT ARROW buttons to
highlight ‘SW Version’. The software version
information is displayed.
Resetting the DAB Radio
The DAB Radio can be reset to the factory
defaults at any time. Once a reset has been
performed, the DAB Radio will automatically begin
to scan for all available stations.
To reset the DAB Radio, press and hold the
RADIO MENU button. After a few seconds,
‘Press SELECT to confirm reset’ will be
shown on the LCD Display.
Press the SELECT button to perform the
reset.
Advanced features
GUADAB08IP_UserGuide.indd 14GUADAB08IP_UserGuide.indd 14 18/07/2008 15:26:0018/07/2008 15:26:00