GPX R602B Radio User Manual


  Open as PDF
of 2
 
1. Adjust AM/FM switch to the AM or FM
position.
2. Turn the Volume dial to turn on the radio
and adjust to the desired volume.
3. Adjust the Tuning dial to tune the radio.
Setup
Radio
Tuning the AM or FM Radio
Adjust the position of the Telescopic FM
Antenna to improve FM radio reception.
An AM antenna is built into the unit. To improve
AM radio reception, adjust the position of the
unit.
Radio Reception
For Warranty Information and the most up-to-date version of this User’s Guide, go to www.gpx.com Customer Service: 1-888-999-4215
Email Support: prodinfo@dpiinc.com, Email Parts: partsinfo@dpiinc.com
Copyright © 2012 Digital Products International (DPI, Inc.) All other trademarks appearing herein are the property of their respective owners. Specications are subject to change without notice.
To download this User’s Guide in English,
Spanish, or French, or to get answers
to frequently asked questions, visit the
support section at: www.gpx.com
Para descargar este Manual del Usuario en
inglés, español y francés, o para obtener
respuestas a preguntas frecuentes, visite
la sección de apoyo en www.gpx.com
Pour télécharger ce guide de l’utilisateur
en anglais, espagnol ou français, ou pour
obtenir des réponses à des questions
fréquemment posées, consultez la rubrique
d’assistance sur www.gpx.com
International Support
Plug the attached AC power cord into an AC
power outlet to power the unit.
Power
Requires 3, C-size, batteries (not included)
Battery Power
Requires a 3.5mm audio cable (not included)
1. Connect a 3.5mm audio cable to the
Line In on the unit and an audio output
on an MP3 player or other audio source.
2. Use the native controls on the
connected MP3 player or other
audio source to play and control
audio played through the unit.
Line In
Using the Line In
1. If the unit is powered on, turn it
off using the Volume dial.
2. Press and hold the Time Set button.
3. Press the Hour button to set the hour.
4. Press the Min button to set the hour.
5. Release the Time Set button
to nish setting the clock.
Clock
Setting the Clock
 previous