Filter
Top Products
10
CD and Radio
Loading a CD
1. Press the Power button to turn the
under cabinet music system on.
2. Press the source button to
switch to CD Mode.
3. Press the Open/Close button
to open the CD drawer.
4. Load a CD into the CD drawer,
label side facing up.
5. Once the CD is loaded, the CD
should start playing automatically.
6. If the CD does not start
playing automatically, press
the Play/Pause button.
Tuning the Radio
1. Press the Power button to turn the
under cabinet music system on.
2. Press the Source button to switch
to AM or FM Radio Mode.
Radio Mode is indicated by “AM” or “FM”
on the display.
3. Press the Skip/Tune button to
tune the AM or FM radio.
4. Hold down the Skip/Tune button to
scan for the next available station.
Programming a CD
1. Follow the instructions
for Loading A CD.
2. Press the Stop button.
3. Press the Prog button.
“01”, indicating the current program
track, will begin ashing on the display.
4. Press the Skip/Tune buttons to
select the CD track you would
like to play in the program.
5. Press the Prog button.
6. Repeat steps 3, 4, and 5 to continue
programming CD tracks.
Up to 20 tracks can be programmed.
7. Press the Play/Pause button to
begin playing the programmed CD.
8. To cancel a program, press
the Stop button twice.
Saving a Station as a Preset
1. Follow the instructions for
Tuning the Radio.
2. Tune to the desired station.
3. Press the Prog button.
4. Preset number will appear
on the display.
5. Press the Skip/Tune buttons to adjust
to the desired preset number.
6. Press the Prog button to
save the current radio station
to the selected preset.
Tuning Preset Radio Stations
1. Follow the instructions for Tuning the
Radio and Saving a Station as a Preset.
2. Press the Memory button to cycle
through preset radio stations