Filter
Top Products
Playing a CD Programming a CD
1. Open the CD Door and load a CD.
2. After loading a CD for play, adjust the
CD/AUX/Radio Mode Switch to CD
Mode.
3. Press the Play/Pause Button to play or
pause the CD.
4. Press the Stop Button to stop a CD
during play.
5. Press the Skip Dn and Skip Up Buttons
to skip through tracks on the loaded CD.
Press and hold the Skip Dn or Skip Up
Buttons to search through an individual
track on the CD.
6. Press the Repeat Button once to repeat
an individual track (A blinking red dot
will appear on the LED Display). Press
the Repeat Button twice to repeat the
entire CD (A steady red dot will appear
on the LED Display).
R
E
P
E
A
T
P
R
O
G
R
A
M
S
K
I
P
D
N
S
K
I
P
U
P
S
T
O
P
P
L
A
Y
/
P
A
U
S
E
6
1. After loading a CD, press the
Program Button. The CD
must be stopped before it can be
programmed.
“01” will ash on the LED Display
to indicate that the unit is in Program
Mode.
2. Press the Skip Dn and Skip Up
Buttons to select a track from the
CD.
3. Press the Program Button to add the
selected track to the program.
4. Repeat steps 2-3 to program up to 20
tracks from a CD.
CD Door