Filter
Top Products
The Goldmund Reference II – Assembly manual
17
STEP 20
Mount the platter on the center axis.
This should be done with great care and the platter must be set in position very
slowly.
IMPORTANT
The platter shouldn’t at any time be dropped or shocked.
Take great care since the platter is very heavy.
Note
:
To remove the platter, help may be required. Platter can be removed by pulling
straight up slowly. A second person may have to push on the central spindle to
ease the process.
STEP 21
Set the 3 large finish cylinders.
Adjust height and lower the tripod assembly by turning the large adjustment
cylinders.
Level the tripod assembly using a bubble level.
Repeat the operation if necessary.