1
Orator-G Wearing
Position the headset lightly on your head (see Figure 3). The click-stop
headband lengthens and shortens to the desired length for a custom fit (pull to
lengthen, push to shorten). The headband retains its length and will not need
adjusting each time it is put on. The stabilizer cushion rests just above the ear
on the side of your head opposite the receiver.
To move the microphone and boom aside without removing your headset, for
example to take a sip of coffee, use your finger to swing the boom back and
forth.
Refer to the Microphone Positioning section for additional information.
Changing Ears
To accommodate left or right ear wearing styles, bend the microphone boom at
the hinge beneath the receiver (see Figure 4). Do not force the microphone
boom beyond the built in stops!
Figure 4
Changing Ears
Figure 3
Headband Wearing