Filter
Top Products
2
3
6
7
Remote Beltpack Functions
1 Headset/Handset Button/
Optional Handset Lifter Button:
Press to enter Headset or Handset Mode as
desired (LED on Remote blinks and LED on Base lights
in Headset Mode; no lights in Handset Mode).
Also for use with optional Remote Handset Lifter; see
Remote Handset Lifter user guide for instructions.
2 Headset Mode Indicator:
Blinks when the system is in Headset Mode;
no light in Handset Mode.
3 Volume Control:
Press + to increase volume.
Press - to decrease volume.
4 Mute Button:
Press to activate mute and disable the
transmit/microphone; press again to enable
transmit/microphone.
Base Functions/Indicators
5 Headset Mode/Online Indicator:
Lights when the system is in Headset Mode;
no light in Handset Mode.
6 Battery Charge Indicator:
Lights red when the Remote is properly seated in the
Base Charger (if LED blinks, battery is not charging:
remove the Remote, wipe the battery charging contacts
and replace); turns green when Battery is fully charged.
7 Spare Battery Charge Indicator:
Lights red when the Battery is properly seated in the Base
Spare Battery Charger (if LED blinks, battery is not charging:
remove the Remote, wipe the battery charging contacts
and replace); turns green when Battery is fullycharged.
8 Transmit Settings:
Adjusts the volume of your voice.
1 is the softest, 8 is the loudest.
9 Telephone Compatibility Settings:
Fine tunes the system to your telephone system.
10 Bass/Treble Tone Settings:
3-position switch to customize receive tone.
2
3
4
1
5
9
8
1
2
3
4
5
6
7
8
A
B
C
D
E
F
G
Nickel Metal Hydride (NiMH), 3.6 V 450 mAH
(GN Netcom part number 1601-809)
Fully charged battery provides minimum of 6 hours
continuous use without recharging.The base has two charging
ports; additional battery can be purchased for longer operation.
Fully charged battery provides minimum 80 hours
without recharging.
Maximum 3 hours to completely recharge a discharged
battery; battery cannot be overcharged.
2 years if battery is recharged when not in use
and never completely discharged.
Battery Information
Battery Type
Capacity On-Line
Capacity Off-Line
Recharging Time
Battery Life
Audio Indicators
Out of Range
Mute
Low Battery
Volume
Headset/Handset
Mode
Tone sounds in headset every 10 seconds
Tone sounds in headset every 15 seconds
Tone sounds in headset every 20 seconds
Tone sounds in headset at maximum and minimum setting
Tone sounds in headset when entering Headset
or Handset Mode
Recharging the Battery
Slide the Remote into the Charger on the front of the Base. To use your Headset while charging, put the system in Headset Mode.
To charge overnight, put the system in the Handset Mode.
Use the charging port on the rear of the Base to charge a second battery (optional).
Setting Up
1
.
2.
3.
4