Filter
Top Products
4
BTH-820, BTA-809
Turn on：
Press the power button for 2 seconds to turn it on.
Turn off：
Press the power button for 4 seconds to turn it off.
Pairing：
While in the off mode, press the power button for 6 seconds，the blue and red
LED will flash quickly by turns and it will search other device for pairing.
Charging：
Connect one end of the charging line to the USB socket of BTH-820 or
BTA-809, and the other end to the USB socket of PC. The red LED will be on
when charging and will be off when battery is full. You can use BTA-809 while
it is in the charging mode.
Pairing procedure
To pair
BTH-820 with
BTA-809
BTA-809 with
another Bluetooth
headset
BTH-820 with a Bluetooth
cell phone
BTH-820 with a PC
Press the power
button for 6
seconds, the blue
and red LED will
flash alternately
and they will
search each other
for pairing. If
pairing is
completed, blue
LED will flash four
times in every 2
seconds.
Set the BTA-809 and
your Bluetooth
headset to pairing
mode, these two
devices will start to
pair automatically. If
pairing is completed,
blue LED will flash
four times in every 2
seconds.
Set the BTH-820 into
pairing mode. In your cell
phone, enter the
Bluetooth menu and
select “search device”
option. When your cell
phone finds the BTH-820,
select it to pair. If pairing
is completed, red LED
will be off, and only blue
LED will flash, then you
can connect your cell
phone to BTH-820.
Set the BTH-820 into
pairing mode. Start
the Bluetooth
software (for example
IVT BlueSoleil 1.6.2
or Windcomm) on
your PC and select
“search device”. After
pairing is completed,
you will be able to
connect BTH-820 and
listen to all the music
from PC.
Pairing
password
-- -- 0000 0000
Note:
Supports AVRCP profile, you can use BTH-820 to control iPod. The functions which can be
controlled are the following:
iPod mode Function available note
Music Play / Pause, Volume
up, Volume down,
Next, Previous.
Before you can use BTH-820 to control the iPod, you must
select any music playlist and press the play button on your
iPod. If you press the play button on BTH-820 instead of
iPod, then it will play the previous playlist.
Photos Play / Pause, Next,
Previous.
Before you can use BTH-820 to control the iPod, you must
select “Photos” / “Photo Library” and press play button on
your iPod.
Videos Play / Pause, Volume
up, Volume down.
Before you can use BTH-820 to control the iPod, you must
select “Videos”, any video file, and then press play button on
your iPod.