Filter
Top Products
SHENANDOAH™ STEREO DELUX 200
ENGINEERING SPECIFICATIONS
INPUTS
XLR Balanced channel input impedance: 2.2 k ohms
XLR Balanced channel input sensitivity: -60 to –30 dBV
¼” Unbalanced channel input impedance: 150 k ohms
¼” Unbalanced channel input sensitivity: 30 to +4 dBV
¼” Unbalanced aux input impedance: 10 k ohms
¼” Unbalanced aux input sensitivity: -20 to +4 dBV
Phantom power (XLR Inputs) +13.6V
AMPLIFIER OUTPUT (each channel)
Power at 8 ohm load: 70 watts RMS
Power at 4 ohm load: 100 watts RMS
THD + N (preamp): <0.02% typ.
THD + N (power amp): <0.05% typ.
Frequency response: 20 Hz – 20 kHz +/- 1dB
CHANNEL EQUALIZATION
Low frequency: 85 Hz shelving, +/-15dB
Low-Mid frequency (sweep): 100 Hz – 1.8 kHz , peaking, +/-12dB
High-Mid frequency (sweep): 350 Hz – 5 kHz , peaking, +/-12dB
High frequency: 8 kHz shelving, +/-15dB
DIRECT OUTPUTS
XLR balanced output level: -30 dBV nominal
XLR balanced output impedance: 150 ohms
¼” unbalanced output level: +4 dBv nominal
¼” unbalanced output impedance: 1 k ohm
EFFECTS LOOP
¼” unbalanced output level: -10 dBV
¼” unbalanced output impedance: 1 k ohm
¼” unbalanced input level: -10 dBV
¼” unbalanced input impedance: 47 k ohm
¼” effects cancel jack: short T-S or R-S cancels returns
DIGITAL EFFECTS
Processor type: Alesis® DSP engine (twin stereo processors)
Internal processing: 24 bit
A/D converter: 24 bit – 64X over-sampling
D/A converter: 24 bit – 128X over-sampling
Dynamic Range: 80 dB
THD + N (1 kHz): <0.01%
Sampling rate: 48 kHz
INTERNAL PRESET STEREO EFFECTS PROGRAMS:
3 – Plate Reverbs 1 – Chorus/Plate
3 – Room Reverbs 1 – Chorus
2 – Hall Reverbs 1 – Flange
1 – Rotary Effect 2 – Delays (long and short)
1 – Chorus/Room 1 – Reverse Scoop
5