Filter
Top Products
Genesis 5.3 Owners Manual Ver 2.2
4
~ÄëçäìíÉ=ÑáÇÉäáíó™
6’ to 8’
20% 80%
10’ to 12’
Power Connections
There are two connections you will need to make to the G5. First,
the power cord for the built-in amplifier will need to be plugged into a
power socket. A 10-foot power cord is included with your speakers
for this purpose. We do not recommend using an extension cord for
the G5 due to the high power demands of the 500W amplifier.
However, if you MUST use an extension cord, use an extremely
heavy duty one. The amplifier can draw up to 10 amps
instantaneously at 115v, hence make sure that the extension cord is
adequately rated.
Before you plug the power cord in, please make sure that the
voltage selector is set to the proper voltage. Japan and North
America will require the 115v setting. Most European countries and
other Asian countries will require 230v. The fuse is a 5amp 250v
slow blow irregardless of voltage used.
There is an on/off switch for the power amplifier. This switch should
always be left on. We recommend that you plug the G5 into an
unswitched outlet, or a switched outlet that can always be left ON.
Typical room placement: Place speakers about 20% of the
way into the room and 10 to 12 feet from the listeners