Filter
Top Products
9
Using the CLA9/CLA9T
Turning the CLA9/CLA9T On and Off
Insert earpiece into ear. Ensure the mode switch is set to MIC (CLA9T).
Roll the On/Off Volume control wheel upwards. The On LED will
display Green. Adjust the Volume to a comfortable level by rolling the
On/Off Volume control wheel.
To turn the CLA9/CLA9T off or on, roll the On/Off Volume control wheel
downwards. The Green LED will switch off and OFF will be showing
on the On/Off Volume control wheel .
CLA9T only
The CLA9T can be used in rooms especially equipped with a magnetic
loop (conference …etc) due to its "built in T coil". Simply by setting
the mode switch to T, the CLA9T will receive the emitted magnetic
waves then amplify them to your earpiece. You will receive all the
benefits of the "built in T coil".
An external microphone is supplied and can be connected in the socket
"Mic" ( option for the CLA9), then set the switch to "Mic" position, in
this case the "built in T coil" is disabled.
Microphone
The CLA9/CLA9T products come with an internal microphone which
enables you to hear all the surrounding sounds.
Tone and Balance Setting
The tone and Balance can be adjusted by using the controls found
within the battery compartment.