Filter
Top Products
Specification Created 5/04
110100
ZIC360NR – GE Monogram 36" Built-In Bottom Freezer Refrigerator
with Automatic Icemaker
729Dia65
Standard Door Handle
Framed Panel
Standard
Door Handle
3/4" Overlay Panel
1/4" Thick Backer Panel
.10" Thick Spacer Panel
696Dia9
Customization Basics: Framed or Overlay Panels,
Custom Handles and Accessory Kits
These bottom-freezer refrigerators are factory set for a left or right
door swing. The door swing is NOT reversible. Choose an RH model
with hinge on the right side; the door swings left to right. Choose an
LH model with hinge on the left side; the door will swing right to left.
Standard supplied handles shown in 1/4" panel position.
Standard supplied handles shown in 3/4" overlay panel position.
Overlay Panels
You may also choose to install custom overlay panels from your cabinet
manufacturer. This design provides a seamless appearance which
integrates smoothly with surrounding cabinetry.
Door Handles
The supplied handles can be adjusted to accommodate both framed
or overlay panels. Custom handles of your choice, supplied by your
cabinetmaker, can also be installed. If desired, you may order ZKHCSS2
Monogram
®
Stainless Steel Tubular Handle Kit for overlay panels.
Side Panels
Side panels must be used whenever the sides of the refrigerator will
be exposed.
Optional Accessory Kits
ZKHCSS2: Monogram Stainless Steel Tubular Handle Kit and Handle
Side Trim for custom handles. For use on 3/4" custom panels.
ZUG2: For side-by-side installation of two trimmed bottom-freezer
refrigerators. This kit provides for the installation of a unified custom
grille panel to span the width of two units using a framed or overlay panel.
ZUGSS2: For side-by-side installation of two stainless steel-wrapped
bottom-freezer refrigerators. This kit provides a unified stainless steel
grille panel to span the width of two units.
Accessory Panels
White or black acrylic and stainless steel accessory panels are available
from your Monogram supplier. Panels are cut to size and ready to install.
These panel kits must be ordered separately.
Black White Stainless Steel
ZPBC360 ZPWC360 ZPSC360
605Dia26
Right-Hand
Door Swing
Left-Hand
Door Swing
Trimmed Refrigerators
ZIC360NRLH, ZIC360NRRH
Trimmed refrigerators are designed to be customized with decorative
panels. Field-installed custom door and grille panels are required.
Framed Panels
You may install 1/4"-thick custom panels from your cabinet
manufacturer. The decorative panel or accessory panel slides
into the factory-installed trim.
For answers to your Monogram,
®
GE Profile
™
or
GE appliance questions, visit our website at
GEAppliances.com or call
GE Answer Center
®
service, 800.626.2000.
R
Listed by
Underwriters
Laboratories