GE CMT-NEZ5 Stereo System User Manual


 
18
GB
You can wake up to music at a preset time. Make
sure you have set the clock (see “Setting the
clock” on page 8).
Use buttons on the remote for the operation.
1 Prepare the sound source you want to
play.
CD: Load a disc. To start from a specific
track, make a program (see “Creating
your own program” on page 11).
Tape: Load a tape (see “Playing a tape”
on page 15).
Tuner: Tune in the preset radio station
(see “Listening to the radio” on page 13).
2 Press VOLUME + or – (or turn VOLUME
control on the unit) to adjust the
volume.
3 Press CLOCK/TIMER SET.
4 Press . or > repeatedly to select
“PLAY”, then press ENTER.
“ON TIME” appears and the hour
indication flashes.
5 Set the time to start playing.
Press . or > repeatedly to set the
hour, then press ENTER.
The minute indication flashes.
Press . or > repeatedly to set the
minute, then press ENTER.
6 Set the time to stop playing following
the same procedure as step 5.
7 Press . or > repeatedly until the
desired sound source appears.
Each time you press the button, the display
changes cyclically as follows:
8 Press ENTER.
The start time, the stop time and the sound
source appear in turn, then the original
display returns.
9 Press ?/1 to turn off the system.
Other operations
Notes
If you use the Play Timer and the Sleep Timer at the
same time, the Sleep Timer has priority.
Do not operate the system from the time the system
turns on until the play starts (about 15 seconds before
the preset time).
If the system is on about 15 seconds before the preset
time, the Play Timer will not be activated.
You cannot use the optional component connected to
AUDIO IN jack as the sound source for Play Timer.
You cannot activate the Play Timer and the Rec
Timer at the same time.
The Play Timer setting remains as long as the setting
is not canceled manually.
Waking up to music
— Play Timer
t
TUNER
y
CD
T
t
TAPE
T
To Do this
Check the setting 1 Press CLOCK/TIMER
SELECT.
2 Press . or >
repeatedly until “PLAY”
appears, then press ENTER.
Change the setting Start over from step 1.
Cancel the timer
1 Press CLOCK/TIMER
SELECT.
2 Press . or >
repeatedly until “OFF”
appears, then press ENTER.