Filter
Top Products
Installing the cabinet mounting brackets and mounting rails 3
Installing the cabinet mounting
brackets and mounting rails
If you are installing the server in a Gateway cabinet, refer to the following
section. If you are installing the server in a non-Gateway cabinet, go to
“Installing generic mounting brackets” on page 5.
Installing Gateway mounting brackets
If Gateway mounting brackets are already installed in the cabinet, go to
“Installing the cabinet mounting rails onto Gateway brackets” on page 4.
To install the Gateway mounting brackets in the cabinet:
1 If you received a mounting template with your cabinet, use it to locate
the exact position of the cabinet mounting brackets.
2 Position the front mounting bracket (labeled FRONT) on the front
vertical mounting rail.
3 Attach the front mounting bracket to the front vertical mounting rail
using two screws from the accessory kit.
Back mounting
bracket
Front vertical
mounting rail
Front mounting
bracket
Back vertical
mounting rail
8506163.book Page 3 Wednesday, May 10, 2000 11:40 AM