Filter
Top Products
GPSMAP 400/500 Series Owner’s Manual 17
Using Charts
Hazard Colors—Turns hazard colors on or off. The Off setting
shows the land as seen from the water. The On setting indicates
shallow water and land with a color scale. Blue indicates deep water,
yellow is shallow water, and red is very shallow water.
Mariner’s Eye 3D
(Water Hazard Colors)
Range Rings—toggles the range rings on or off to provide distance
measurement.
Safe Depth
—adjusts the depth at which red indicates dangerous
depths.
Lane Width—adjusts the width of the course line drawn when
navigating. This setting also affects routes (Route To), but does not
affect automatic guidance (Guide To).
Using Fish Eye 3D
Using the depth contour lines of the BlueChart g2 Vision
cartography, Fish Eye 3D provides an underwater view of the sea
oor or lake bottom. Use the Range keys to adjust the view.
NOTE: You must have an “s” series unit (such as a GPSMAP 420s)
and a transducer wired through a marine network to receive sonar
information.
Fish Eye 3D Settings
To access additional settings or options for the Fish Eye 3D screen,
press MENU.
View—selects a sh eye view of fore, aft, port, or starboard.
Sonar Cone (only available if sonar is present)—turns a cone that
shows the area covered by your transducer on or off.
Fish Symbols
(only available if sonar is present)—displays
suspended targets (such as sh). Targets are indicated by red, green,
and yellow spheres. Red indicates the largest targets and green
indicates the smallest targets.