Furuno 100 Speaker User Manual


 
6
ENGLISH
Foreword
Thank you for purchasing the IBANEZ SW100 bass amp.
Read this manual thoroughly prior to using your amplifier in order to get the most out of the functions available. Then keep the manual in a safe place.
Features
The amp head of the SW100 features a 100W output, and the speaker section uses a powerful IBANEZ original 15-inch POWER JAM 1508B speaker together with a
PJPT85-2 piezo horn tweeter, giving you the ultimate in sound quality and convenience.
The pre-amp EQ is a newly designed 4-band active EQ with ±15 dB of range, covering a versatile range of performance needs and allowing wide yet detailed adjustments.
The SW100 also features an internal limiter, creating punchy low-end.
Precautions during use
Do not subject the amplifier to shocks by dropping, etc., or treat it roughly in any way.
Place the amplifier carefully in a stable position. The sound from the amplifier will vary depending on how and where it is set up.
Do not use or store the amplifier in locations where it is subject to direct sunlight or in environments that experience extreme temperatures and humidity levels.
Reduce the volume to “0” or switch off the power supply when connecting the guitar shielded cable and the effects or other cables required for external connection. Note
that the noise generated when plugs are inserted and removed may cause severe damage to the equipment.
To avoid the danger of fire, do not place containers of liquid on the amp.
As long as the SW100 is connected to an electrical outlet, it is not completely insulated from the power supply even if the power switch is turned off. When you are not using
it, leave the power turned off. If you will not be using the SW100 for an extended period, leave the power cable disconnected.
Names and functions for each part
03.12.19, 10:07 AMPage 6