Operational Amplifier Version 1.0
Chapter 2 Amplifier Overview
2.1 Block Diagram of Operational Amplifier
Figure 1 Block Diagram of Operational Amplifier
2.2 Pins of Operational Amplifier
The OPAMP uses the OPAMP_P pin and the OPAMP_N pin as the analog input pins of the
operational amplifier, and uses the OPAMP_O pin as the analog output pin of the operational
amplifier.
When GS [5] is set to "1B" and GS [4:0] is set to "00000B", the OPAMP will work as a
standalone open loop operational amplifier.
When GS [5] is set to "0B", the OPAMP will work as a non-inverting closed loop operational
amplifier. It provides six different closed loop gain settings through the software.
MCU-AN-500080-E-10 - Page 6