Filter
Top Products
-8-
BASSXPANDER
........................................................ 3
Press the SND button
for more than 1.5 second to switch ON/OFF of the BASS mode. When the BASS
mode is on, “bASS” is displayed and the bass enhances.
RADIO SELECTION BUTTON (BND)
........................... 4
Press the BND button
to switch from CD player mode to radio.
Each time the button is pressed, the function changes as shown below.
CD OR AUX SELECTION BUTTON (CD/AUX)
............... 5
Press the CD/AUX button
to switch from radio mode to AUX or CD player mode.
CLOCK BUTTON (CLK)
............................................. 6
Press the CLK button
to switch between the clock and audio display. When an audio function is
performed while the time display is selected, the audio display will appear for 5 seconds, then the display
will return to the time mode.
TO CANCEL THE BEEP TONES
................................. 1, 7
Turn off the power by depressing the POWER button
.
To cancel all beep tones, press the POWER button
and the button
simultaneously for more than
3 seconds and then "bP : oF" is displayed.
To turn on the beep tones again, perform the same procedure. The beep tones are set and "bP : on" is
displayed.
DEMO MODE ON/OFF
............................................... 1, 8
Turn off the power by depressing the POWER button
.
To turn ON/OFF the demo mode, press the POWER button
and the button
simultaneously for
more than 3 seconds.
DEMO ON : Demo is displayed.
DEMO OFF : Display is OFF.
(DEFAULT : DEMO ON)
FMI FMII AM
FMIII
1
2
3
1
2
ECD-T1820_E.fm Page 8 Tuesday, December 14, 2004 8:33 AM