Filter
Top Products
M US TA N G
™
MI NI
Factory Restore &
Firmware Updates
Factory Restore
You can restore your Mustang Mini amplifier to the original factory
settings if desired. All user presets will be erased!
To restore the Mustang Mini amplifier to factory settings:
1. Turn the amplifier OFF.
2. Press and hold the EXIT button while turning the amplifier
ON. Continue holding the EXIT button until it is no longer
illuminated.
!
The FACTORY RESTORE function will erase all user modified
presets. It will also restore the AMBER bank of presets and
any effect selections that have been modified using Fender
FUSE software.
Firmware Update
From time to time, Fender may make available firmware updates
for your Mustang Mini amplifier to improve operation or to add
new features. To update the firmware on your amplifier you will
need to connect it through the USB port to a computer with an
internet connection and running Fender FUSE software.
♫
Please download the latest version of the Fender FUSE
manual from fuse.fender.com.
Notes & Tips
♫
LOW BATTERY: When running the Mustang Mini on
batteries, the amp will start to distort at lower volumes as
the batteries get low. This will be most noticeable on the
clean presets. Change the batteries when the sound quality
starts to deteriorate.
♫
You can use the handle on your Mustang Mini amplifier
as a tilt-back leg to support the amplifier at an angle for
improved sound projection.
♫
You can loop the power adapter cable around the clip on
the back panel of your Mustang Mini amplifier to prevent it
from disconnecting.
There are several great places you can go to learn more about your
Mustang Mini amplifier and music in general:
• www.fender.com/support
• Join a Fender Community forum where you can ask questions
and read threads. There's even a forum just for the Mustang:
www.fender.com/community/forums
• Find music theory learning materials and sheet music at Hal
Leonard Publications: www.halleonard.com
Battery compartment
Tilt-back position
Power cord clip
5
f e n d e r . c o m