Filter
Top Products
M US TA N G
™
MI NI
Save Button
Your Mustang Mini amplifier gives you the powerful
ability to save every setting on the amplifier as part
of a preset. The SAVE button will light up red when you turn any
programmable knob on the amplifier. This indicates that you
have temporarily modified the current preset. You can undo your
modifications simply by selecting a different preset using the
PRESET knob, then turning back to the original preset.
♫
The EXIT button will not cancel changes to the current
preset. Only by selecting a different preset using the PRESET
knob, the footswitch or Fender FUSE, will your temporary
changes be erased.
To save your own custom preset:
1. To save a preset you must first modify an existing preset by
turning any of the programmable knobs, such as GAIN (once
the SAVE button is illuminated, you can proceed to step 2).
2. Press the SAVE button. The SAVE and EXIT buttons should be
flashing rapidly. You can press EXIT at this point to cancel the
save process.
3. Turn the PRESET knob to select a preset to overwrite. You
can only overwrite the red and green banks of the amplifier
type that you started from (if you started by modifying the
amber bank, you must select either the red or green bank to
overwrite).
♫
You can save over the AMBER bank of presets only by using
Fender® FUSE™ software.
4. Press the SAVE button again to confirm the save. Your new
preset has been created!
Aux / Phones Jacks
Auxiliary Input
You can use the Auxiliary jack to input audio into your
Mustang Mini amplifier for accompaniment. Connect the
headphone output on your CD player or MP3 player to
the AUX jack using a mini-stereo cable. Use the volume control
on your player, together with the MASTER volume knob on the
Mustang Mini, to adjust the auxiliary volume level.
Phones Jack
Plug in your headphones, ear buds, or powered speakers
to enjoy the Mustang Mini's stereo features. This jack
may also be used as a stereo recording output. The
amp's internal speaker is muted when the PHONES jack is used.
Footswitch
Connect a (optional) 1-button footswitch (P/N
0994049000) into the FTSW jack to enable remote
selection of your two favorite presets. The LED above
the FTSW jack will turn red or green to indicate which
footswitch preset is active.
To program the footswitch:
1. Select a preset that you want to assign to the footswitch. The
preset must not be modified (the SAVE button must NOT be
illuminated to proceed to step 2).
2. Press the SAVE button. The SAVE and EXIT buttons should be
flashing rapidly. You can press EXIT at this point to cancel the
footswitch assignment process.
3. Press the footswitch button to select either the red or green
LED above the FTSW jack that you wish to associate with the
current preset.
4. Press the SAVE button to confirm the footswitch assignment.
Now, when you press the footswitch, the chosen preset will be
activated with the assigned red or green footswitch indicator.
USB Port
Use the USB port to connect the Mustang™ Mini amplifier
to your computer and take your music to the next level:
• Use Fender® FUSE™ software to control the Mustang Mini
from your computer and access bonus amp features not
available from the amplifier alone.
• Record and edit Mustang Mini audio using your favorite
recording software.
♫
You can adjust the USB recording volume level by pressing
and holding the EXIT button while you turn the VOLUME
knob.
• Stream live audio and play with people around the world
using Fender® BAND JAM, powered by eJamming® AUDiiO.
♫
For a 30-day trial subscription to Fender BAND JAM, visit:
www.fender.com/ejamming
4
f e n d e r . c o m