ALL TUBE PREAMP AND POWERAMP
GENERATE THAT TONE AS ONLY
TUBES CAN
MAGNETIC INTERFERENCE REDUCING
CHASSIS ELIMINATES UNWANTED NOISE
AND RADIO INTERFERENCE
FENDER SPECIAL DESIGN HIGH
PERFORMANCE SPEAKERS
ROAD-WORTHY AND MUSICAL
COMPONENTS, CAPABLE OF
HANDLING THE MOST DEMANDING
PERFORMANCE SITUATIONS
CONSTRUCTED FROM HAND-
SELECTED WOODS, EMPLOYING
RUGGED CORNER JOINERY FOR
ENDURING RELIABILITY
COVERED IN GENUINE TOLEX
®
FOR
LONG LIFE AND LASTING GOOD LOOKS
VIBRO-KING
®
INTRODUCTION
Congratulations on your purchase of a Fender
®
Vibro-King Professional Tube Amplifier. The Vibro-
King is a single channel all tube combo amplifier built
entirely using point to point wiring. Moreover, each
Vibro-King amplifier is individually hand-crafted from
the finest components available and assembled at
the Fender Amplifier Custom Shop in Corona,
California, USA.
The All-Tube Vibro-King features 3 Reissue “Blue
Frame” 10" speakers with Alnico Magnets speakers
and is rated at 60 Watts R.M.S. into 2Ω. Furthermore,
the Dwell, Mix and Tone knobs control the all-tube
reverb allowing a “custom” designed reverb tone. Still,
the footswitch offers the ability to remotely switch on
and off both the Vibrato and Fat features. With the
built-in effects loop, adding an external signal
processor is a snap.
Designed for the most discriminating of guitarists, the
Vibro-King produces tones ranging from the crystal
clean to a smooth yet smooth overdriven crunch.
Couple the Vibro-King with the optional Vibro-King
212 Enclosure and you have an amplifier that is
undoubtedly The King of Tone.
In order to thoroughly understand the operation,
features and functions of your Fender
®
Vibro-King
®
Professional Tube Amplifier, please read and refer as
needed to this operation manual. By doing so, your
amplifier is sure to provide you with years of trouble-
free music making and maximum playing enjoyment.
FENDER
®
PROFESSIONAL TUBE AMPLIFIERS