Meridian Audio AC12 Speaker User Manual


  Open as PDF
of 2
 
4. Multichannel SpeakerLink to SpeakerLink slave loudspeakers and non-SpeakerLink master
DSP loudspeaker – Slave
DSP loudspeaker – Slave
MERIDIAN
SPEAKERLINK
INPUT OUTPUT
MERIDIAN
SPEAKERLINK
INPUT OUTPUT
Meridian Surround Controller
MERIDIAN
SPEAKERLINK
MASTER SLAVE
AC12
S/PDIF
SPEAKER
LINK
MASTER
COMMS
SLAVE
COMMS
RS232
DSP loudspeaker – Master
INPUT
DIGITAL
INPUT OUTPUT
MERIDIAN
COMMS
INPUT OUTPUT
DSP loudspeaker – Slave
INPUT
DIGITAL
INPUT OUTPUT
MERIDIAN
COMMS
INPUT OUTPUT
SpeakerLink lead
SpeakerLink lead
M lead S lead
S lead (coax unused)
5. Multichannel SpeakerLink to non-SpeakerLink slave loudspeakers and SpeakerLink master
DSP loudspeaker – Slave
DSP loudspeaker – Master
MERIDIAN
SPEAKERLINK
INPUT OUTPUT
MERIDIAN
SPEAKERLINK
INPUT OUTPUT
Meridian Surround Controller
MERIDIAN
SPEAKERLINK
SLAVE MASTER
AC12
S/PDIF
SPEAKER
LINK
MASTER
COMMS
SLAVE
COMMS
RS232
DSP loudspeaker – Slave
INPUT
DIGITAL
INPUT OUTPUT
MERIDIAN
COMMS
INPUT OUTPUT
DSP loudspeaker – Slave
INPUT
DIGITAL
INPUT OUTPUT
MERIDIAN
COMMS
INPUT OUTPUT
SpeakerLink lead
SpeakerLink lead
M lead S lead
Use this application to connect up a multichannel system that
includes both SpeakerLink and non-SpeakerLink loudspeakers,
where the speaker you have chosen as the master does not have
SpeakerLink.
Connect the Master SpeakerLink output from the source to the
SpeakerLink input on the AC12.
Connect the Master Comms and S/PDIF connections on the
AC12 to the loudspeaker you have configured as master, using
a Meridian M lead.
Use the DIN Comms or BNC Comms as appropriate.
Connect the non-SpeakerLink loudspeakers together using a
Meridian S lead.
Take a return from the last non-SpeakerLink slave loudspeaker
back to the AC12 Slave Comms connection, using the Comms
part of a Meridian S lead.
Connect the Slave SpeakerLink output from the source to the
first SpeakerLink loudspeaker, using a SpeakerLink lead.
Connect the remaining SpeakerLink loudspeakers together
using SpeakerLink leads.
•
•
•
•
•
•
AC12
User Guide
Use this application to connect up a multichannel system that
includes both SpeakerLink and non-SpeakerLink loudspeakers,
where the speaker you have chosen as the master does have
SpeakerLink.
Connect the Master SpeakerLink output from the source to the
master SpeakerLink loudspeaker, using a SpeakerLink lead.
Connect the SpeakerLink loudspeakers together using
SpeakerLink leads.
Connect the Slave SpeakerLink output from the source to the
SpeakerLink input on the AC12.
Connect the Master Comms and S/PDIF connections on the
AC12 to the first non-SpeakerLink slave loudspeaker, using a
Meridian M lead.
Use the DIN Comms or BNC Comms as appropriate.
Connect the non-SpeakerLink loudspeakers together using a
Meridian S lead.
•
•
•
•
•
 previous