Filter
Top Products
Setting up the stereo power amplifier
15
● Switch the BRIDGE MODE switch on both amplifiers to the
OFF position.
● Connect the left audio output from the preamplifier to both
inputs on one amplifier.
● Connect the right audio output from the preamplifier to both
inputs on the other amplifier.
● Remove the links bridging the LF and HF terminals on the
back of each loudspeaker.
● Connect the red and black terminals from the LF and HF units
on one loudspeaker to the red and black terminals on each
channel of one stereo amplifier.
● Likewise, connect the LF and HF units from the other
loudspeaker to the red and black terminals on each channel of
the other stereo amplifier.
To bi-amp to two passive
loudspeakers
559 Stereo Power Amplifier
559 Stereo Power Amplifier
OFF
OFF
Input
Extremely high sound quality can be achieved using two
separate 559 Stereo Power Amplifiers, one to drive each
loudspeaker. The two channels in each 559 Stereo Power
Amplifier are used to drive the LF and HF units in each
loudspeaker.