Extron electronic MTP U R Series Stereo Receiver User Manual


 
Specifications — MTP U R Series Receivers, cont’d
Extron MTP U R Series Universal Mini Twisted Pair Receivers • Specications
2
Control/remote — external device (pass-through, unidirectional or
bidirectional) (MTP U R RSA SEQ, MTP U R RS SEQ, or MTP U R RS)
Serial control port input/output RS-232 via (1) 3�5 mm, 3 pole captive screw connector
N
The serial communications link of an MTP U R RSA SEQ, MTP U R RS SEQ, or MTP U R RS is
unidirectional only, transmitter to receiver, unless the receiver’s internal switch has been set�
Baud rates ��������������������������������������� Up to 38400 bps at up to 500’ (152 m) (Higher data rates and distances are
possible�
Performance varies based on baud rate and cable length�)
Protocol ������������������������������������������� Data bits = 5 - 8
Stop bits = 1 or 2
Parity = odd, even, none
Flow control = XON, XOFF, none
N
Protocol is mirrored between the transmitter and the receiver.
Serial control pin configurations Captive screw connectors: 1 = TX, 2 = RX, 3 = GND
General
Recommended cable type ������������ CAT5/E/6 (shielded or unshielded)
External power supply ����������������� 100 VAC to 240 VAC, 50/60 Hz, external; to 12 VDC, 2 A, regulated
Power input requirements ����������� 12 VDC, 0�5 A
Temperature/humidity ���������������� Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
Cooling ������������������������������������������� Convection, no vents
Mounting
Rack mount ������������������������ Yes, with optional 1U, 9�5" deep rack shelf, part #60-190-01 (RSU 129) or
#60-604-01 (RSB 129); or VersaTools
®
1U, 3�5" deep rack shelf, part #60-190-20
(RSF 123) or #60-604-20 (RSB 123)
Furniture mount ���������������� Yes, with optional Mini Under-Desk Mounting Kit, part #70-212-01
(MBU 123)
Pole mount ������������������������� Yes, with optional projector mounting kit, part #70-217-01 (PMK 100)
Enclosure type ������������������������������� Metal
Enclosure dimensions ������������������� 1�7" H x 4�3" W x 3�0" D (1U high, quarter rack wide)
(4�3 cm H x 10�9 cm W x 7�6 cm D)
(Depth excludes connectors�)
Product weight ������������������������������ 0�6 lbs (0�3 kg)
Shipping weight ���������������������������� 2 lbs (1 kg)
Vibration ����������������������������������������� ISTA 1A in carton (International Safe Transit Association)
Listings�������������������������������������������� UL, CUL
Compliances ����������������������������������� CE, FCC Class A, VCCI, AS/NZS, ICES
MTBF ����������������������������������������������� 30,000 hours
Warranty ����������������������������������������� 3 years parts and labor
N
All nominal levels are at ±10%.
N
Specifications are subject to change without notice.
7.6-100208-D7