Extron electronic MTP 4T 15HD RS Stereo Receiver User Manual


  Open as PDF
of 2
 
Specifications — MTP 4T 15HD RS, cont’d
Extron MTP 4T 15HD RS • Specications
2
Control/remote — external device (pass-through, unidirectional or bidirectional)
Serial control port input/output � RS-232 via (1) 3�5 mm, 3 pole captive screw connector
Serial control port output/input � 1 set of proprietary signals on a female RJ-45 jack
N
The serial communications link is unidirectional only, transmitter to receiver, unless the
receiver's directional DIP switch or jumper has been repositioned. The switch or jumper should be
repositioned only when the receiver is the only one in the system.
Baud rates (all other models)������� Up to 38400 bps at up to 600’ (183 m) (Higher data rates and distances are
possible� Performance will vary based on baud rate and cable length�)
Protocol (all other models) ����������� Data bits = 5 - 8
Stop bits = 1 or 2
Parity = odd, even, none
Flow control = XON, XOFF, none
N
Protocol is mirrored between the transmitter and the receiver.
Serial control pin configurations � Captive screw connector: 1 = TX, 2 = RX, 3 = GND
General
Recommended cable type ������������ CAT 5/5E/6 (shielded or unshielded)
Power ���������������������������������������������� 100 VAC to 240 VAC, 50/60 Hz, 20 watts, internal
Temperature/humidity ���������������� Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
Cooling ������������������������������������������� Convection, no vents
Rack mount ������������������������������������ Yes, with included mounting kit MBD 149, part #70-077-03
Enclosure type ������������������������������� Metal
Enclosure dimensions ������������������� 1�7" H x 17�5" W x 8�5" D (1U high, full rack wide)
4�3 cm H x 44�4 cm W x 21�6 cm D
(Depth excludes connectors�)
Product weight ������������������������������ 6�0 lbs (2�7 kg)
Shipping weight ���������������������������� 10 lbs (5 kg)
Vibration ����������������������������������������� ISTA 1A in carton (International Safe Transit Association)
Regulatory compliances
Safety ����������������������������������� CE, C-tick, CUL, UL
EMI/EMF ��������������������������� CE, C-tick, FCC Class A, ICES, VCCI
MTBF ����������������������������������������������� 30,000 hours
Warranty ����������������������������������������� 3 years parts and labor
N
All nominal levels are at ±10%.
N
Specifications are subject to change without notice.
7.6-092608-D5
 previous