Extron electronic MTP 15HD RS Series Stereo Receiver User Manual


  Open as PDF
of 2
 
Specifications — MTP 15HD RS Series, cont’d
Extron MTP 15HD RS Series • Specications
2
Control/remote — external device (pass-through, unidirectional or bidirectional)
Serial control port input/output
MTP T 15HD RS ���������������� RS-232 via (1) 3�5 mm, 3 pole captive screw connector
Receivers ���������������������������� 1 set of proprietary signals on a female RJ-45 jack
Serial control port output/input
MTP T 15HD RS ���������������� 1 set of proprietary signals on a female RJ-45 jack
Receivers ���������������������������� RS-232 via (1) 3�5 mm, 3 pole captive screw connector
N
The serial communications link of an MTP RL 15HD RS or an MTP RL 15HD RS SEQ is
unidirectional only, transmitter to receiver, unless the receiver's directional jumper has been
repositioned. The jumper should be repositioned only when the receiver is the only one in the
system.
Baud rates �������������������������������������� Up to 38400 bps at up to 600' (183 m) (Higher data rates and distances are
possible� Performance will vary based on baud rate and cable length�)
Protocol ������������������������������������������ Data bits = 5 - 8
Stop bits = 1 or 2
Parity = odd, even, none
Flow control = XON, XOFF, none
N
Protocol is mirrored between the transmitter and the receiver.
Serial control pin configurations � Captive screw connector: 1 = TX, 2 = RX, 3 = GND
General
Recommended cable type ������������ CAT 5/5E/6 (shielded or unshielded)
External power supply ����������������� 100 VAC to 240 VAC, 50/60 Hz, external; to 12 VDC, 2 A, regulated
Power input requirements ����������� 12 VDC, 0�5 A
Temperature/humidity ���������������� Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
Cooling ������������������������������������������� Convection, no vents
Mounting
Rack mount ������������������������ Yes, with optional 1U, 9�5" deep rack shelf (RSU 129, #60-190-01 or RSB
129, #60-604-01); 1U, 6" deep rack shelf (RSU 126, #60-190-10 or RSB 126,
#60-604-10); or VersaTools
®
1U, 3�5" deep rack shelf (RSF 123, #60-190-20 or
RSB 123, 60-604-20)
Furniture mount ���������������� Yes, with optional Mini Under-Desk Mounting Kit, part #70-212-01
(MBU 123)
Pole mount ������������������������� Yes, with optional projector mounting kit, part #70-217-01 (PMK 100)
Enclosure type ������������������������������� Metal
Enclosure dimensions ������������������� 1�7" H x 4�3" W x 3�0" D (1U high, quarter rack wide)
(4�3 cm H x 10�9 cm W x 7�6 cm D)
(Depth excludes connectors�)
Product weight ������������������������������ 0�4 lbs (0�2 kg)
Shipping weight ���������������������������� 2 lbs (1 kg)
Vibration ����������������������������������������� ISTA 1A in carton (International Safe Transit Association)
Regulatory compliances
Safety ����������������������������������� CE, C-tick, CUL, UL
EMI/EMC �������������������������� CE, C-tick, FCC Class A, ICES, VCCI
MTBF ����������������������������������������������� 30,000 hours
Warranty ����������������������������������������� 3 years parts and labor
N
All nominal levels are at ±10%.
N
Specifications are subject to change without notice.
7.6-092608-D8
 previous