Filter
Top Products
1. Set power selector switch to OFF position.
2. Plug the cell phone charging cord into the Phone Charge socket.
3. Select the correct charging tip for your phone.
4. Plug charging tip into the charging cord and into the phone’s
charging socket.
5. Rotate the dynamo crank.
Turn it on with the POWER switch.
1. Select the BATTERY position when using AA batteries.
2. Select the DYNAMO/ADAPTER position when powering via the
AC adapter or internal, rechargeable Ni-MH battery pack.
3. To turn off, set power selector switch to OFF.
Set VOLUME knob to desired level.
1. Select AM, FM or SW with the band selector switch. When
using SW, select the desired shortwave band with the 8-position
SW band selector knob (SW 1-8). For FM and SW, fully extend the
telescopic antenna.
8
TURNING THE RADIO ON AND OFF
ADJUSTING THE VOLUME
TUNING-IN STATIONS
CELL PHONE CRANK CHARGING continued
FR250 OWNER’S MANUAL