Filter
Top Products
INITIAL SETUP
4
1. Open the battery compartment; it slides downward with rm
pressure at center of hinge.
2. Connect the battery pack.
1. Rechargeable battery pack (included).
2. 3 AA batteries (not included).
3. AC adapter/charger (not included).
4. Continually turning the crank, even with no batteries installed.
1. Switch the power selector to the OFF position.
2. Turn the dynamo-crank clockwise or counter-clockwise about
2 turns per second.
3. After charging, select the DYNAMO/ADAPTOR position for power.
While charging, the red LED charging light illuminates.
1. Open the battery compartment.
2. Install 3 AA batteries, observing polarity diagram.
3. For power, set the power selector switch to the BATTERY position.
POWER SOURCES
AA BATTERY OPERATION
CHARGING THE BATTERY PACK
FR250 OWNER’S MANUAL