Eton E1100 Stereo System User Manual


 
6
AC ADAPTOR (INCLUDED)
E1100 OWNER’S MANUAL
The E1100 can be used with an AC adaptor that supplies an output
of 3 volts DC, negative polarity, 100 milliamperes or greater current.
To purchase this, visit www.etoncorp.com.
The clock displays time in 12-hour format. With the radio turned on
or off, press TIME SET for two seconds. Within three seconds press
the HOUR and MINUTE buttons to set the correct hour and minutes.
They can be pressed with quick, short presses to advance slowly or
they can be kept pressed down to advance rapidly. When nished,
release the TIME SET button or wait until the digits stop ashing.
Select the BUZZER or RADIO setting on the right side of the radio.
With the radio turned on or off, press AL.SET for two seconds. Within
three seconds press the HOUR and MINUTE buttons to set the cor-
rect hour and minutes. They can be pressed with quick, short presses
to advance slowly or they can be kept pressed down to advance
rapidly. When nished, release the AL.SET button or wait until the
digits stop ashing.
SETTING THE CLOCK
SETTING THE ALARM