Filter
Top Products
4BTypical Operation and Setting of Parameters
Navigate to the TV Service Menu. Select the following options:
• Service ID - display or change the service ID for the decoded Service.
• Service List - press the Up and Down arrows until the selected Service is
displayed. A small check mark is displayed in front of the Service, indicating that
it is selected.
The TV Service Menu also allows the user to select which of the currently selected
Service components are to be decoded. This is relevant for Services with multiple
audio streams associated with the video.
• Aud1 Lang
- enter the desired three-character ISO 639 language code to select
the correct audio PID for the video Service. If the selected code is not present in
the audio stream, the first audio stream in the PMT table will be decoded.
4.4 Setting Up Audio 2 Service
The Audio2 Service Menu contains the Service list for the currently tuned
Transport Stream. The list also contains a ServiceID item, which allows the user to
select the Service by typing in the correct Service ID. By selecting a Service in the
Service list, the decoder will decode the selected Service on the corresponding
audio output.
Navigate to the Audio2 Service Menu. Select the following options:
• ServiceID -
display or change the service ID for the decoded Service.
• Service List - press the Up and Down arrows until the selected Service is
displayed. A small check mark is displayed in front of the Service, indicating that
it is selected.
The Audio2 Service Menu also allows the user to select which of the available
audio components are to be decoded. This is relevant for services with multiple
audio streams associated with the video.
• Aud2 Lang - enter the three-character ISO language code to select the
correct audio PID for the selected audio Service.
4.5 Set the Default Output Options
The Setup Menu contains all the submenus and items, required to set the
configuration and control the daily use of the unit.
Navigate to the Video Setup Menu under Setup and change the preferred video
format to be used when the unit is not decoding video.
2
Select the following options:
2
The Videoformat selection is not a format converter. The video format of the incoming MPEG stream overrides this setting.
EN/LZT 790 0002/1 R1A 2011-02-21
14 (20)