Ericsson RX8300 Satellite Radio User Manual


 
RX8305
RX8305 provides the core capabilities of a single
service SD decoder. The RX8305 sets itself apart from
competing solutions by allowing distribution systems
to take advantage of the bandwidth and hence OPEX
reducing combination of MPEG-4 AVC SD compression
and DVB-S2 satellite modulation.
By additionally incorporating legacy DVB-S and MPEG-
2 decoding this Multi-Format SD decoder provides
flexible reception of a multiplex of satellite channels,
descramble and decode a single service and interface
into a local broadcast station through any of the unit’s
analog composite video, SDI digital video and ASI
transport stream interfaces.
RX8310
The RX8310 is purposely designed for Program
Distribution where one or more services are distributed
over satellite by a single content originator into multiple
receive locations. In this scenario the content originator
often requires control of the receivers at their remote
sites. The in-built Director by Ericsson over-air control
and security system meets this need perfectly.
The RX8310 offers capability to descramble single or
multiple services outputting the descrambled transport
stream into the local station either as ASI or IP. Using
the RX8310’s multi-format capability the receiver can
decode any 4:2:0 SD or HD MPEG-2 or MPEG-4
service to analog SD to interface into a legacy analog
tier or for local monitoring.
Ericsson’s
RX8300
Receiver Range
[Service 1]
[
Service 1]
[
Service 2]
[
Service 3]
[
Service 4]
RX8305
Local Broadcast
Station
RX8310
Local Turn-around
Headend
IP