Filter
Top Products
Setting Options Description
Standby Mode Communication On Enable this setting to allow the
following operations to occur
Communication Off
when the projector is in standby
mode:
• Monitor and control the
projector over a network
• Output audio and video to an
external device (A/V Output
must be set to Always On)
• Communication from the
HDBaseT port
HDBaseT Control Communications Selects the communication
settings when you connect the
Extron XTP
projector to an HDBaseT
Transmitter or switcher
Control Communications:
enables or disables
communication from the Ethernet
and serial ports on the HDBaseT
transmitter; also disables the
projector's LAN, RS-232C, and
Remote ports
Extron XTP: set to On when you
connect the Extron XTP
transmitter or switcher to the
HDBaseT port
Multi-Projection — See the Multi-Projection settings
table in this topic
Lamp Select Dual Select the lamps to be turned on
Single
Lamp1
Lamp 2
170