Epson AVR-687 Home Theater System User Manual


 
Advanced Operation Advanced Operation
ENGLISH
36
ENGLISH
When the ZONE2 SOURCE function is set to
TUNER”, the preset channel can be selected pressing
[CHANNEL].
Press [INPUT SELECTOR].
The ZONE2 source switches directly.
The output level of the ZONE2 SPEAKER OUT
terminals can be controlled pressing [VOLUME].
Default setting (ZONE2 volume level):
– – – dB (Minimum)
4
5
6
Set [MODE SELECTOR 1] to the “AUDIO”.
Press [ZONE2 ON].
The ZONE2 indicator lights.
To cancel the ZONE2 mode:
Press [ZONE2 OFF].
1
3
Remote control unit operations during multi-
source playback (selecting the source)
This is only possible when the main unit in the ZONE2 mode (
page 43).
Set [MODE SELECTOR 2] to the “ZONE2”.
2
Multi zone music entertainment system
ZONE2 speaker out can be used when “ZONE2” is selected at “Power Amp Assignment”. In this case, surround back speaker out cannot
be used for MAIN ZONE.
For instructions on installation and operation of separately sold devices, refer to the devices’ operating instructions.
The main zone output can be turned on and off with [MAIN].
¢When using the SURR.BACK/ZONE2 amplifier as the ZONE2
•To use the ZONE2, turn on the ZONE2.
•The output of the ZONE2 SPEAKER OUT terminals can be adjusted with [ZONE2 VOLUME].
The input source selected with [INPUT SELECTOR] is output for the ZONE2 speaker output.
[System configuration and connections example]
Using this unit’s internal amplifier as the ZONE2.
AVR-687
DVD player
Input
Monitor
MAIN ZONE 5.1-channel systems
ZONE2 SPEAKER OUT
SYSTEM REMOTE
CONTROL UNIT RC-1048
C
FL FR
SL
SW
SR
B
ZONE2
: Speaker cable
Refer to “Connections” ( page 17).