Filter
Top Products
42 Making Detailed Adjustments
■ Color Gamut (Home Cinema 8700 UB only)
Note: The Color Gamut setting can only be used when the Color Mode is set to THX (see
page 28).
You can select from three different color gamut settings according to the source material
and locale. Select
SMPTE-C for standard definition (USA, Canada, and other regions
using NTSC),
EBU (PAL) for Europe, or HDTV (all regions).
■ Contrast Enhancement (Home Cinema 8700 UB only)
Note: This setting cannot be used when the Color Mode is set to x.v.Color (see page 28).
This setting automatically enhances contrast by calculating based on the current contrast.
You can select from 3 levels of contrast enhancement.
■ Super-resolution (Home Cinema 8700 UB only)
This setting sharpens blurred images, enhancing the apparent detail of the image. You can
select from 3 levels of enhancement. Note that intentionally blurred parts of the image,
such as out-of-focus backgrounds, may become sharper.
Adjustments for Computer Images
In addition to the settings described previously, you can adjust the Tracking and Sync settings
for analog RGB computer images. Normally, these settings are adjusted automatically by the
projector. If you notice that the image is blurry or contains dark vertical bands, you may need
to adjust the settings yourself.
■ Auto Setup
Leave this setting on so that the projector automatically adjusts the tracking, sync, and
position of the image.
Image > Advanced > Color Gamut
Image > Advanced > Contrast Enhancement
Image > Advanced > Super-resolution
Signal > Auto Setup