Filter
Top Products
Declaration of Conformity
According to 47CFR, Part 2 and 15, Class B Personal Computers and Peripherals; and/or
CPU Boards and Power Supplies used with Class B Personal Computers
We: Epson America, Inc.
Located at: 3840 Kilroy Airport Way, MS: 3-13, Long Beach, CA 90806
Telephone: (562) 981-3840
Declare under sole responsibility that the product identified herein, complies with
47CFR Part 2 and 15 of the FCC rules as a Class B digital device. Each product marketed,
is identical to the representative unit tested and found to be compliant with the
standards. Records maintained continue to reflect the equipment being produced can
be expected to be within the variation accepted, due to quantity production and testing
on a statistical basis as required by 47CFR §2.909. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
Trade Name: Epson
Type of Product: Projector
Model: H585A
Marketing Name: PowerLite Home Cinema 5025UB
Epson America, Inc. Limited Warranty
Two-Year Projector Limited Warranty and 90-Day Lamp Limited Warranty.
What Is Covered: Epson America, Inc. (“Epson”) warrants to the original retail purchaser
of the Epson projector product enclosed with this limited warranty statement that the
product, if purchased new and operated in the United States, Canada, or Puerto Rico will
be free from defects in workmanship and materials for a period of two (2) years from the
date of original purchase. This limited warranty applies only to the projector and not to
the projector lamp, which carries a limited warranty period of ninety (90) days from the
date of original purchase. For warranty service, you must provide proof of the date of
original purchase.
What Epson Will Do To Correct Problems: If your product requires service during
the limited warranty period, please call Epson at the number on the bottom of this
statement and be prepared to provide the model, serial number, and date of original
purchase. Epson will, at its option, repair or replace the defective unit, without charge
for parts or labor. If Epson authorizes an exchange for the defective unit, Epson will
ship a replacement product to you, freight prepaid, so long as you use an address in
the United States, Canada, or Puerto Rico. You are responsible for securely packaging
the defective unit and returning it to Epson within five (5) working days of receipt of
the replacement. Epson requires a debit or a credit card number to secure the cost of
the replacement product in the event that you fail to return the defective one. If Epson
authorizes repair instead of exchange, Epson will direct you to send your product to
Epson or its authorized service center, where the product will be repaired and sent back
to you. You are responsible for packing the product and for all costs to and from the
Epson authorized service center. When warranty service involves the exchange of the
product or of a part, the item replaced becomes Epson property. The exchanged product
or part may be new or refurbished to the Epson standard of quality, and at Epson’s
option, the replacement may be another model of like kind and quality. Epson’s liability
for replacement of the covered product will not exceed the original retail selling price of
the covered product. Exchange or replacement products or parts assume the remaining
warranty period of the product covered by this limited warranty. If Epson replaces the
lamp as part of the warranty service, the replacement lamp carries the limited 90-day
warranty stated above.
What This Warranty Does Not Cover: This warranty covers only normal use in the United
States, Canada or Puerto Rico. Excessive continual use is not considered normal use. This
warranty does not cover consumables such as filters. This warranty is not transferable.
Epson is not responsible for warranty service should the Epson label or logo or the
rating label or serial number be removed. Epson is not responsible for warranty service
should the product fail to be properly maintained or fail to function properly as a result
of misuse, abuse, improper installation, neglect, improper shipping, damage caused by
disasters such as fire, flood, and lightning, improper electrical current, software problems,
the use of non-Epson lamps, add-in cards or cables, interaction with non-Epson products,
or service other than by Epson or an Epson Authorized Servicer. Postage, insurance, or
shipping costs incurred in presenting your Epson product for carry-in warranty service are
your responsibility. If a claimed defect cannot be identified or reproduced in service, you
will be held responsible for costs incurred.
DISCLAIMER OF WARRANTIES: THE WARRANTY AND REMEDY PROVIDED ABOVE ARE
EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESSED OR IMPLIED WARRANTIES INCLUDING,
BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR
A PARTICULAR PURPOSE AND NON-INFRINGEMENT. UNLESS STATED HEREIN, ANY
STATEMENTS OR REPRESENTATION MADE BY ANY OTHER PERSON OR FIRM ARE VOID.
Remedies: Your exclusive remedy and Epson’s entire liability for a material breach of
this Agreement will be limited to a refund of the price paid for the Epson products
covered by this Agreement. Any action for breach of warranty must be brought within
3 months of the expiration date of the warranty. Epson is not liable for performance
delays or for nonperformance due to causes beyond its reasonable control. Except as
provided in this written warranty, neither Epson nor its affiliates shall be liable for any
loss, inconvenience, or damage, including direct, special, incidental or consequential
damages, including lost profits, cost of substitute equipment, downtime, claims of third
parties, including customers, or injury to property, resulting from the use or inability to
use the Epson products, whether resulting from a breach of warranty or any other legal
theory. Some jurisdictions do not allow limits on warranties or remedies for breach in
certain transactions. In such jurisdictions, the limits in this paragraph and the preceding
paragraph may not apply.
You can also automatically convert 2D HDMI content to 3D. To enable the
2D-to-3D Conversion option, press the Menu button on the projector or
remote control. Select Signal and press Enter, then select 3D Setup and
press Enter. Select 2D-to-3D Conversion and press Enter. Select the Weak,
Medium, or Strong setting, then press Enter.
See the online User’s Guide for more information on adjusting 3D images.
Troubleshooting
If you see a blank screen or the No signal message after turning on your
video device or computer, check the following:
•
Make sure the power light on the projector is blue and not flashing.
•
Press the button on the projector or one of the Source buttons on
the remote control to switch to the correct image source, if necessary.
•
If you’re using a Windows
®
laptop, press the function key on your
keyboard that lets you display on an external monitor. It may be labeled
CRT/LCD or have an icon such as . You may have to hold down the
Fn key while pressing it (such as Fn + F7). Wait a moment for the display
to appear.
•
If you’re using a Mac laptop, open System Preferences and select
Displays. Click the Arrangement tab and select the Mirror Displays
checkbox.
If 3D images aren’t displaying properly, check the following:
•
Press the 2D/3D button to switch to 3D viewing mode, if necessary.
•
Make sure that you are within the 3D viewing range. See “Choose a
location” on the front of this sheet or the online User’s Guide for more
information.
•
Check that your 3D glasses have not entered standby mode. Slide the
power switch on the 3D glasses into the Off position, then back to the
On position.
•
Press the Menu button on your remote control, select the Signal menu,
then 3D Setup, then select 3D Format. Make sure that the Auto option
is selected.
•
Check that your video device and media are both 3D-compatible. Refer
to the documentation that came with your video device for more
information.
Where to get help
Manual
For more information about using the projector, click the icon on your desktop
to access the online manual (requires an Internet connection). If you don’t
have a User’s Guide icon, you can install it from the projector CD or go to the
Epson website, as described below.
Telephone support services
To use the Epson
®
PrivateLine
®
Support service, call (800) 637-7661. This service
is available for the duration of your warranty period. You may also speak with
a support specialist by calling (562) 276-4394 (US) or (905) 709-3839 (Canada).
Support hours are 6 am to 8 pm, Pacific Time, Monday through Friday, and
7 am to 4 pm, Pacific Time, Saturday. Days and hours of support are subject
to change without notice. Toll or long distance charges may apply.
Internet support
Visit epson.com/support (U.S.) or epson.ca/support (Canada) for solutions
to common problems. You can download utilities and documentation, get
FAQs and troubleshooting advice, or e-mail Epson.
Registration
Register today to get product updates and exclusive offers. You can use the CD
included with your projector or register online at epson.com/webreg.
EPSON and PowerLite are registered trademarks, and EPSON Exceed Your Vision is a registered logomark of
Seiko Epson Corporation. PrivateLine is a registered trademark of Epson America, Inc.
Mac is a trademark of Apple Inc., registered in the U.S and other countries.
General Notice: Other product names used herein are for identification purposes only and may be trademarks
of their respective owners. Epson disclaims any and all rights in those marks.
This information is subject to change without notice.
© 2014 Epson America, Inc., 9/14
Printed in XXXXXX CPD-42011
Optional accessories
For a list of optional accessories, see the online User’s Guide.
You can purchase RF 3D glasses (part number V12H548006) or other
accessories from an Epson authorized reseller. To find the nearest reseller,
call 800-GO-EPSON (800-463-7766). Or you can purchase online at
epsonstore.com (U.S. sales) or epson.ca (Canadian sales).
Notices
Bluetooth Safety and Specifications
Contains Bluetooth module model: DBUB-E207
This document provides safety instructions and describes the specifications. Read this
document carefully before use to ensure your safety and product performance.
U.S.
FCC Notices
Contains FCC ID: BKMAE-E207, TLZ-WH064R
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one of the following
measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
Caution: Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate this equipment.
This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
Properly shielded cables must be used for connections to LCD Projector in order to meet
FCC emission limits. The cable for peripheral with a ferrite core must be used for RF
interference suppression.
Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20 cm between the radiator & your body.
Canada
Industry Canada (IC) Notices
Contains IC: 1052D-E207, 6100A-AWWH064R
This Class B digital apparatus complies with Canadian ICES-003.
CAN ICES-3(B)/NMB-3(B)
This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance
20 cm between the radiator & your body.
In Canada, warranties include both warranties and conditions.
Arbitration, Governing Laws: Any disputes arising out of this Agreement will be settled
by arbitration to be conducted before a single arbitrator in Los Angeles, California,
in accordance with the commercial Arbitration Rules of the American Arbitration
Association, and judgment upon the award rendered by the arbitrator may be
entered in any court having jurisdiction thereof. This Agreement shall be construed in
accordance with the laws of the State of California, except this arbitration clause which
shall be construed in accordance with the Federal Arbitration Act.
To find the Epson Authorized Reseller nearest you, please visit our website at:
epson.com.
To find the Epson Customer Care Center nearest you, please visit epson.com/support.
To contact the Epson Connection
SM
, please call (800) 637-7661 or (562) 276-4394 in
the U.S. and (905) 709-3839 in Canada or write to Epson America, Inc., P.O. Box 93012,
Long Beach, CA 90809-3012.