Filter
Top Products
1) Window to display the live picture: it is possible to store and/or print a picture complete
with comments and measurements. It is then possible to perform measurements and
send them to an Excel template in order to obtain statistics.
2) View finder window on the area where measurements are being taken, in order to
guarantee the maximum measure accuracy.
3) Material chart: the name of the material to be tested is inserted here (the measurements
on the picture will be expressed in different colours); if necessary, the measurements
of every material will be inserted automatically in different Excel columns.
The simple and intuitive application bar makes the software easier to use also for less expert operators.
The software includes a Data Bank with reference pictures that can be
personalised according to the user’s needs.
In order to help the operator and guarantee the maximum accuracy, different special
features are available: i.e. light and colour adjusting can be made digitally through the
software (as well as mechanically, by operating on the microscope filters).