Filter
Top Products
Page 19
Configuration
All of the X-Ref Tower and Center/LCR Monitor speakers are designed to be used full-range
(although smaller members are limited in their maximum low-frequency output). The X-Ref
Surrounds are, obviously, intended to be used mainly as surround speakers in a multi-
channel system.
If using your X-Ref loudspeakers in a stereo system with bass management and one or
more subwoofers, choose a crossover point that works well in your room.
If using your X-Ref loudspeakers in a multi-channel home theater system, the Tower models
should be set as “large” and the X-Ref Surrounds should be set as “small”. For the other
models you should try “large” or “medium” and see which works best for you (if prompted,
the X-Ref Surrounds are bipoles).