Filter
Top Products
4
2.) Place the “AA” batteries in the compartment, following the polarity symbols
(+ and - ) marked inside.
3.) Replace the cover.
4.) Set DYNAMO/BATTERY selector switch to BATT.
Notes:
• When the radio does not operate properly or the sound becomes weak, replace
the “AA” batteries.
• If you do not plan to use the radio for a week or more, please remove the “AA”
batteries. Leaking batteries can damage the radio and such damage is not
covered by the warranty.
WARNING: Dispose of exhausted batteries properly, in accordance with any
local disposal regulations. Do not bury them or burn them.
AA / UM3 / R6
AA / UM3 / R6
RP6289_030504.p65 5/3/2004, 11:024