Filter
Top Products
7
Press the POWER button ❶ to
turn the unit on, the display will
light. Set the VOLUME control ❷
to a low setting.
2
1
1
Press the CLOCK SET/MEMORY
button ❶. Within 9 seconds, press
the MEMORY UP button ❷ until
the desired memory number
appears on the display.
2
1
4
Use the Tuning Up/Clock Adj.(+)
FWD. ( ) or (–) REV. ( )
button to select a station.
3
Press the FUNCTION button ❶ to
select RADIO; TUNER will appear
in the display.
Press the BAND button ❷ to the
desired band - FM or AM.
1
2
2
Within 9 seconds, press the
CLOCK SET/MEMORY button
again to set the station in the
selected memory.
5
Repeat steps 3 through 5 to
program up to 10 stations in each
band, if desired.
In case the main power supply
is interrupted, the memory
presets will be erased unless
back-up batteries are installed.
6
SETTING RADIO PRESETS
This unit can preset 10 AM and 10 FM radio stations for convenient recall.
Follow steps 1 and 2 above.
1
Set the VOLUME ❶ and BBS ❷
as desired.
2
1
3
Press the MEMORY UP button to
select a preset; the station will
automatically be tuned in.
2
RECALLING RADIO PRESETS
PD5500 O/M.QXD 7/9/01 4:35 PM Page 7