Emerson NR51 Stereo System User Manual


 
8
OPERATING INSTRUCTIONS
LISTENING TO THE RADIO
1.) To turn the system on, rotate the ON/OFF-VOLUME control clockwise until a
click’ is heard, and set the Volume to a low level. The Tuning Dial comes on.
2.) Set the Function selector (AM/FM/CD) to the desired band, AM or FM .
3.) Rotate the TUNING control to tune to the desired radio station. If you tune to an
FM Stereo station, the FM ST. indicator will come on.
4.) Adjust the ON/OFF-VOLUME control as desired.
5.) When you are finished listening turn the ON/OFF-VOLUME control counter
clockwise until a click’ is heard.
Antenna Information
The AM antenna is inside the cabinet. If AM reception is unsatisfactory try
repositioning the cabinet slightly until the internal antenna is picking up the strongest
signal.
The FM wire antenna is located on the back cabinet. If necessary adjust the position
and direction of this antenna until you find the position that provides the best
reception.
AM
CD
TUNING
OFF
VOLUME
FM
NR51_011604.p65 16/1/2004, 10:468