Emerson NR38 Stereo System User Manual


 
AM FM
TUNING
VOLUME
F
M
A
M
1
7
1
1
0
8
1
0
6
1
4
0
1
0
0
1.) AC Power Cord.
2.) FM Wire Antenna (Back Cabinet).
3.) Speaker.
4.) FM Radio Dial.
5.) AM Radio Dial.
6.) Power ON/OFF-VOLUME Control.
7.) TUNING Knob.
8.) AM/FM Band Selector.
LOCATION OF CONTROLS
1
2
3
8
7
4
5
6
OPERATING INSTRUCTIONS
Extend and position the FM Wire Antenna to its full length for best FM reception.
Connect the AC power cord to your household AC outlet.
1.) To turn the system on, rotate the ON/OFF-VOLUME control clockwise until a click’ is heard, the dial light
comes On’. Set the Volume to a low level.
2.) Set the Band selector to the FM or AM position.
3.) Rotate the TUNING knob to tune to the desired station.
4.) Adjust the ON/OFF-VOLUME control to the desired level.
5.) When you are finished listening turn the ON/OFF-VOLUME control counter clockwise until a click’ is heard.
The dial light goes Off’.
Hints For Better Reception
If FM reception is noisy or weak, try changing the position and direction of the FM wire antenna until you find the
position that provides the best reception.
If AM reception is unsatisfactory, try repositioning the main unit slightly until the internal AM bar antenna picks
up the strongest signal.
NR38_031904.p65 19/3/2004, 9:502