Filter
Top Products
PREPARATION FOR USE
5
Carefully remove the unit from the display carton and remove all packing
material from the unit.
Unwind the AC power cord and extend it to its full length.
Unwind the FM Antenna wire and extend it to its full length.
Place the unit on a stable, level surface, convenient to an AC outlet, out of
direct sunlight, and away from sources of excess heat, dust, moisture, humidity,
or strong magnetic fields.
Connect the plug to your AC outlet.
UNPACKING AND SET UP
TRANSIT SCREW
Raise the lid to expose the phonograph. The phonograph has been secured
for shipment with a transit screw. Use a coin or screwdriver to turn the transit
screw clockwise. This will allow the turntable to float .
,,
,,