Filter
Top Products
7
PLAYING CASSETTE TAPES
On Karaoke Tapes, side A is stereo instrumental* (music only) and side B is instrumental on one channel
and vocals on the other channel.
* Depending on the song, background vocals may be included on side A.
CASSETTE TAPE OPERATION
Press the POWER button ❶ to
turn the unit on; the POWER
indicator will light. Slide the
Function switch ❷ to the TAPE
position.
1
2
1
Adjust the MASTER VOLUME ❶
and TONE ❷ controls as desired.
2
1
4
Press the PLAY (➛) button to
begin playback.
3
Press the STOP/EJECT ( )
button on one of the decks to
open the Cassette Door and insert
a cassette with the open end
facing up and full reel on the right.
2
To stop playback before the tape
ends, press the STOP/EJECT
( ) button. The PLAY (➛)
button is released and the tape
motor shuts off.
7
When the tape reaches the end,
the auto-stop mechanism
activates, the PLAY (➛) button is
released and the tape motor
shuts off. Press the STOP/EJECT
( ) button to open the Cassette
Door and remove the tape.
8
TO SING ALONG
If you would like to sing along with a
tape, simply play the tape, connect
one or two microphones and sing
along! If you insert a Karaoke tape,
you can set the VOCAL switch to
one of the following positions:
MUSIC: Plays instruments, but not
vocals.
NORMAL: Plays instruments and
vocals.
AUTO: The Auto Vocal control is a
special circuit that automatically
suppresses the vocal tracks when
you sing along through the
microphone.
To hear vocals, tape side B must be
played.
To advance or rewind the tape
rapidly, press either the F.FWD
(➛➛) ❶ or REWIND (❿❿) ❷
button. When you reach the desired
point, press the PLAY (➛) button ❸
to resume normal playback.
3
2
1
5
To pause playback momentarily,
press the PAUSE ( ) button. The
tape movement stops but the tape
motor is still running. Press the
PAUSE ( ) button again to release
pause and resume normal playback.
6
EK215 KARAOKE O/M.QXD 8/15/02 3:42 PM Page 7