Emerson iS133 Stereo System User Manual


 
iS133-072406-01
Printed in China
Emerson Radio Corp. warrants manufacturing defects in original material,
including original parts and workmanship, under normal use and conditions,
for a period of ninety (90) days from the date of original purchase in
the U.S. With your dated proof of purchase, we will provide repair service
at no charge for labor and parts at an authorized Depot Repair Facility, or
replace the product in our discretion. For repair or replacement, pack your
unit in a padded box, enclose your check or money order payable to Emerson
Radio Corp. in the amount of $5.00 (not required by California residents)
to cover shipping and handling costs, and enclose a copy of your proof of
purchase. Send your unit to:
Emerson Radio Corp.,
5101 Statesman Drive,
Irving, TX 75063.
Customer Service Hotline: 1-800-898-9020.
This warranty does not cover damage from negligence, misuse, abuse,
accident, failure to follow operating instructions, commercial use, rental,
repairs by an unauthorized facility, or products purchased, used, serviced
or damaged outside of the United States.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU
MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO
STATE.
AU898H
LIMITED WARRANTY
Battery Precautions
Replacement of batteries must be done by an adult.
Do not mix old and new batteries.
Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium)
batteries.
The supply terminals are not to be short-circuited.
Non-rechargeable batteries are not to be recharged.
Exhausted batteries are to be removed.
Only batteries of the equivalent type are to be used.
Batteries are to be inserted with the correct polarity.
Dispose of batteries properly. Do not dispose of batteries in fire.
The batteries may explode or leak.
Operating Instructions
1.) Connect the mini stereo plug from this unit to your external device such as an iPod
®
, MP3 player, personal CD player, personal
cassette player, or personal stereo radio.
2.) Press the POWER button of this unit to turn the power ‘On’. The Power LED indicator comes on.
3.) Operate your external device as usual.
4.) Rotate the VOLUME + / – control to adjust the volume of this unit.
NOTE: If you connected this speaker system to the headphone jack of your external device you will need to adjust the volume
controls of both devices to find the desired level. If you connected this speaker system to the Line Out of your external device,
you only need adjust the Volume control of this speaker system. The Volume control on your external device will have no effect on
the sound level.
5.) When you are finished listening press the POWER button of this unit to turn the power ‘Off’. The Power LED goes off.
Don't forget to shut off the power of your external device as well, if necessary.
Changing the Batteries
When the sound output of this system becomes weak or distorted you should replace all four batteries as soon as possible.
Do not leave exhausted batteries in the unit for an extended period of time as they may eventually leak and cause damage to the unit.