Emerson iR30 Stereo System User Manual


 
13
Auxiliary Input Jack (AUX IN)
This unit includes a 3.5mm Auxiliary Input Jack on the back panel. This allows you
to connect external auxiliary music sources such as an iPod
®
Shuffle, other MP3
players, or personal CD players, and listen to those devices through the speaker
of this unit.
1.) Connect the headphone jack of your external device to the AUX IN jack on the
back panel of this unit. (NOTE: The connection cable is not included.)
2.) Turn on the power to this unit and to your external device.
3.) Set the Band/Function selector of this unit to the AUX/iPod position.
4.) Begin playback of your external device as usual. You should hear the sound of
your external device through the speaker of this unit.
5.) Adjust the volume controls of this unit and your external device to the desired
level.
6.) When you are finished listening shut off the power on this unit and on your
external device.
IMPORTANT!
You must remove the connection cable from the Auxiliary Input(AUX IN) Jack
on the back of this unit in order to listen to an iPod
®
connected to the docking
station on the top panel.
When a cable is connected to the AUX IN jack, the docking station is
automatically disconnected.
iR30_5_101206.p65 13/10/2006, 13:4413