Emerson HD8110 CD Player User Manual


 
12
NORMAL CD PLAYBACK
Make sure you have installed the batteries.
Make sure the HOLD switch is set to the Off(left) position.
Make sure to set the VOLUME control to a low setting before you put on
the headphones.
IMPORTANT:
This CD player can play normal CDs plus CD Recordable (CD-R) and CD
Rewriteable (CD-RW) discs. However the playability of CD-R/RW discs may be
affected by the type of software that was used in rippingthe tracks from the
original discs and burningthe tracks onto the blank media. Playability may also
be affected by the quality and condition of the blank media you use for recording.
100% compatibility cannot be guaranteed. This is not an indication of any problems
with your player.
1.) Slide the CD door OPEN switch to the right to unlock
and open the CD door.
2.) Place your CD on the center spindle with the printed
label side facing up. Press downward on the disc near
the center hole until the disc is fully seated on the
spindle.
3.) Close the CD door and connect the headphones to the PHONES jack (green
color) by pushing the headphone plug into the PHONES jack until a click’
sound is heard.
4.) Press the PLAY/PAUSE button to begin
playback. The display will briefly show “– –
flashes while the player reads the disc. The
total tracks and playing time will appear briefly in the display and then the
playback will begin on track 1. The display will show the elapsed playing time
of the track being played.
5.) Adjust the VOLUME control as desired.
OPEN
HD8110_052404.p65 25/5/2004, 12:2112