Filter
Top Products
15
PROGRAMMED PLAYBACK
You can program the player to play just the tracks you want to hear in the specific
order that you want them to play. A maximum of 24 tracks can be programmed.
Note: You cannot program tracks during playback. If a disc is playing press
the STOP – POWER OFF button once to stop playback before you perform
the programming steps below.
1.) While the total tracks and playing time appear
in the display press the PROG (Program)/
MEMORY button. The PROG indicator
appears in the display together with the track number “0 0” and the program
memory number “P – 01”.
2.) Press the or buttons to select the first
track to be programmed.
Example: Track number 7.
3.) When the desired track number appears in
the track display press the PROG/MEMORY
button again to enter track number 7 into
program memory number 1. The track number display returns to “0 0” and the
program memory number advances to “P – 02”.
4.) Repeat steps 2 and 3, selecting a different track number each time until you
entered up to 24 tracks in the CD program memory.
Note: The same track number can be programmed more than once if desired.
5.) After you have entered up to 24 tracks in the CD program memory press the
POWER ON – PLAY/PAUSE button to
begin programmed playback. The PROG
indicator remains in the display. The tracks
you programmed will be played in the desired order.
CD-RW
PROG
CD-RW
PROG
CD-RW
PROG
CD-RW
PROG
HD8003_ib040403.p65 4/4/2003, 14:1715