Filter
Top Products
19
Notes:
• After pressing the MEMORY button to begin setting the clock, you must press
the or buttons to adjust the display within 6 seconds, otherwise the digits
stop flashing and the time cannot be adjusted.
If this occurs, press the MEMORY button again and then press the or
buttons within 6 seconds to adjust the display.
• The display will always show the time when the system is in the Standby (Power
Off) mode.
• To display the time while the system is in the AUX (LINE), TUNER or CD (Stop)
mode, press the MODE button on the front panel or remote control once.
ES79_080504.p65 9/8/2004, 10:2119