Filter
Top Products
11
LISTENING TO THE RADIO
1.) Press the POWER button on the main unit or the remote control. The main
display turns “On” and the STANDBY indicator goes “Off”.
2.) If necessary, press the TUNER button on the top panel of main unit or the
FUNCTION button on remote control to select the Tuner function. The display
will show an AM or FM station frequency. To select a different band, press the
STOP/BAND button.
3.) Tune to the desired frequency as follows:
• Manual Tuning
Repeatedly press the or buttons until the frequency of the desired
station appears on the display.
• Automatic Tuning
Press and hold the or buttons until the display begins to move, then
release the buttons. The tuner will search up or down the band for the next
strong station and stop on that station. Repeat this procedure until the tuner
stops on your desired station.
4.) Adjust the VOLUME and EQ controls as desired.
5.) If you tuned to an FM Stereo station the STEREO indicator will appear in the
display.
6.) When you are finished listening press the POWER button on the main unit or
remote control to return to the Standby (Power Off) mode. The STANDBY LED
Indicator comes “On”.
AM
ES50_ib071403.p65 14/7/2003, 11:4011